Ricoh Aficio 1022 - Copying; Basic Procedure

29
2. Copying
Basic Procedure
A
AA
A
Make sure that the machine is in
Copy mode.
If the machine is not in Copy
mode, press the
{
{{
{ Copy }
}}
}
key.
B
BB
B
When the machine is set for user
codes, enter a user code (up to 8
digits) with the number keys, and
then press the
{
{{
{
#
}
}}
}
key.
The machine is ready to copy.
Reference
⇒ p.71 “Other Functions”
C
CC
C
Make sure that there are no previ-
ous settings remaining.
Note
❒ To clear settings, press the
{
{{
{
Clear Modes
}
}}
}
key.
D
DD
D
Place your originals.
Reference
⇒ p.31 “Placing Originals”
E
EE
E
Set your desired settings.
F
FF
F
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
can be set between 1 and 99 (de-
fault: 99).
❒ To change the number entered,
press the
{
{{
{
Clear/Stop
}
}}
}
key and
enter the new number.
G
GG
G
Press the
{
{{
{
Start
}
}}
}
key.
The machine starts copying.
Note
❒ When you place originals on the
exposure glass, press the
{
{{
{
#
}
}}
}
key after all originals are
scanned.
❒ Copies are delivered face down.
❒ To stop the machine during a
multi-copy run, press the
{
{{
{
Clear/Stop
}
}}
}
key.
❒ To return the machine to the in-
itial condition after copying,
press the
{
{{
{
Clear Modes
}
}}
}
key.