Using the Network Delivery Scanner with the Document Server
51
5
Delivering Stored Files
Files stored in the Document Server
which scanned in the scanner func-
tion are delivered.
Note
❒ This section explains mainly how
to select files to be delivered. For
more information about the deliv-
ery procedure, see p.45 “Delivery
Procedure”.
❒ When the stored files are deliv-
ered, scan settings cannot be made.
The files are delivered with the
specified scan settings when they
are stored in the Document Server.
A
Display the list of stored files.
Reference
⇒ p.58 “Viewing a List of
Stored Files”
B
Select a file to be delivered.
Note
❒ When you select a file protected
password, the Password Entry
screen appears. After you have
entered the correct password
and pressed [OK], the file will be
selected.
C
To select multiple files, repeat
step
B
.
Note
❒ You can select up to 30 files for
one operation.
❒ If you select multiple files, the
files will be delivered in the or-
der they were selected.
❒ If you press [Display Selection],
the selected files will only be
shown in the order of delivery.
D
Press [OK].
The screen for specifying a destina-
tion appears.
E
Specify a destination.
F
If required, select the sender (scan
data delivery source) and a sub-
ject.
G
Press the {Start} key.
The selected stored files are deliv-
ered.
To Next Page
Loading...
