Advanced Features
49
4
H
HH
H
Press [Exit].
The Transfer Stations and End Re-
ceivers are displayed.
I
II
I
Press the {
{{
{Start}
}}
} key.
Specifying an End Receiver
When you make a Transfer Request,
you must specify the final destinations
(End Receivers) for your message.
You cannot enter the numbers of the
End Receivers directly. Instead, enter
a simple code that describes where
the numbers are stored in the Trans-
fer Station (in Quick Dials or Groups).
The numbers must first have been
stored in Quick Dials or Groups in the
Transfer Station(s).
❖
❖❖
❖ Quick Dial
A Press [q
qq
q Quick Dial
].
B Enter the number (2 or 3 digits)
of the Quick Dial where the End
Receiver is stored.
Note
❒ For example, to choose the
number stored in Quick Dial
01 in the Transfer station, en-
ter: {
{{
{0}
}}
} {
{{
{1}
}}
}.
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U
UU
U Prev.] or [T
TT
T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the {
{{
{Clear/Stop}
}}
} key or [Clear].
❖
❖❖
❖ Speed Dial
A
Press [q
qq
qp
pp
p Speed Dial].
B Enter the number (2 or 3 digits)
of the Speed Dial code.
Note
❒ For example, to choose the
number stored in Speed Dial
12 in the Transfer Station, en-
ter: {
{{
{1}
}}
} {
{{
{2}
}}
}
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U
UU
U Prev.] or [T
TT
T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the {
{{
{Clear/Stop}
}}
} key or [Clear].
❖
❖❖
❖ Group Dial
A Press [q
qq
qp
pp
pp
pp
p Group Dial
].
B
Enter the number (2 digits) of
the Group number.
Note
❒ For example, to choose the
number stored in Group Dial
04 in the Transfer station, en-
ter: {
{{
{0}
}}
} {
{{
{4}
}}
}.
❒ Press [Add] if you wish to en-
ter more End Receivers.
❒ Press [U
UU
U Prev.] or [T
TT
T Next] to
see the End Receivers al-
ready entered. You can select
an End Receiver from this list
and remove it by pressing
the {
{{
{Clear/Stop}
}}
} key or [Clear].
RusC2FaxADEN-F_V4_FM.book Page 49 Monday, August 20, 2001 10:52 AM