Reception Features
92
5
When There is No Paper of the Correct Size
If there is no paper in your machine that matches the size of a received message,
the machine will choose a paper size based upon the paper you have available.
For example, if your machine has B4L and A3L installed and you receive a
A4L size message, check the A4 column of the following table. The paper size
at the top has the highest priority. In this case, since B4L is a higher priority than
A3L, the message is printed on A4L.
If only B5L is loaded and you receive an A3L message, the received message
is stored in memory and will not be printed.
❖
❖❖
❖ Priority Table
RusC2FaxADEN-F_V4_FM.book Page 92 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
