Changing Key Operator Settings
153
8
C
CC
C Enter the vertical size of the pa-
per with the number keys.
Note
❒ You can specify a vertical
size from 210mm (8.3 inch) to
305mm (12.0 inch). You can-
not enter a size smaller than
210mm or larger than
305mm. ⇒ p.95 “Having In-
coming messages Printed on
Paper from the Bypass Tray”
❒ Each time you press [mm] or
[inch], the units change be-
tween "millimeter" and
"inch" alternately. If you en-
ter a length and change the
unit by pressing [mm] or
[inch], the length is converted
automatically according to
the unit (fractions are round-
ed off).
D
DD
D Press [#
##
#].
The programmed size is shown.
E
EE
E Press [Horiz.].
F
FF
F Enter the horizontal size of the
paper with the number keys.
Note
❒
The way of programming/chang-
ing Bypass Tray Paper Size for
Copy Function is different from
that of Fax Function.
⇒
"Copying
from the Bypass Tray" in Copy
Reference manual
❒ You can specify a horizontal
size from 148mm (5.9 inch) to
600mm (23.6 inch). You can-
not enter a size smaller than
148mm or larger than
600mm. ⇒ p.95 “Having In-
coming messages Printed on
Paper from the Bypass Tray”
❒ The optional HDD is required
to specify the horizontal pa-
per size from 433 mm (17.0
inch) to 600mm (23.6 inch).
Without the optional HDD,
the maximum size to be en-
tered is 432mm (17.0 inch).
❒ Each time you press [mm] or
[inch], the units change be-
tween "mm" and "inch" alter-
nately. If you enter a length
and change the unit by press-
ing [mm] or [inch], the length
is converted automatically
according to the unit (frac-
tions are rounded off).
G
GG
G Press [#
##
#].
H
HH
H Press [OK].
G
GG
G
Press [Exit].
H
HH
H
Press the {
{{
{User Tools/Counter}
}}
} key.
The initial display is shown.
RusC2FaxADEN-F_V4_FM.book Page 153 Monday, August 20, 2001 10:52 AM
To Next Page
Loading...
