10 August, 2001 KEY COUNTER INSTALLATION
3-47
7. Connect the cable [A].
8. Hook the key counter holder assembly [B] onto the stepped screw [C].
9. Secure the key counter holder assembly with a screw [D].
10. Set SP5-401-2 to 1 (This enables the restricted access control function.)
NOTE: The key counter function is made available for other modes by
changing the following SP modes.
• SP5-401-12 (Document server mode)
• SP5-401-22 (Fax mode)
• SP5-401-32 (Scanner mode)
• SP5-401-42 (Printer mode)
B027I232.WMF
[A]
[C]
[D]
[B]
To Next Page
Loading...
