Settings You Can Change with User Tools
55
4
8. Key Operator Tools (8.
Key Op. Tools)
Use to view or print counters and set up user codes. If you have
registered the access code and set “3.Key Op. Access”to “On”,
you cannot use this function unless you enter the correct code.
Reference
“4.Prog. Key Op. Code” and “3.Key Op. Access”
1.Show Counter
View counter values on the display.
• Total Pages
• A3 size
2.Print Counter
Print counter lists.
Limitation
❒ The optional 16 MB copier memory unit is required for this
function.
3.Key Operator Access (3.Key Op. Access)
Turn the key operator access code to “On” or “Off”. If you select
“On”, the registered access code is required for all applications.
Note
❒ Default: Off
Reference
“4.Prog. Key Op. Code”
4. Registering the key operator code (4.Prog. Key Op. Code)
Register or change the key operator access code (eight digits).
• Register the access code
Select this function and enter your desired number (eight dig-
its) using the number keys, and then press the {
{{
{OK}
}}
} key.
• Change the access code
When you select this function, the currently registered code is
displayed on the left.
Enter the new code (eight digits) using the number keys, and
then press the {
{{
{OK}
}}
} key.
5.Restricted Access
Restrict user access for the copier using the optional key counter.
Note
❒ Default: Off
Menu Description
KirC1a_AE_F_FM.book Page 55 Friday, January 31, 2003 4:54 PM
To Next Page
Loading...
