Settings You Can Change with User Tools
29
3
Measurement Unit
You can switch the measurement between “mm” and “inch”.
Note
Default: Metric version: mm
Inch version: inch
Tray Paper Settings
Tray Paper Size:Tray 1–2
Select the size of the paper loaded in the paper tray.
• The paper sizes you can set for Tray 1 are as follows:
A4L, B5 JISL, A5K, 8
1
/
2
" × 11"L, 5
1
/
2
" × 8
1
/
2
"K, 16KL
• The paper sizes you can set for Tray 2 are as follows:
A4L , 8
1
/
2
" × 14"L, 8
1
/
2
" × 13"L, 8
1
/
4
" × 14"L, 8
1
/
4
" × 13"L, 8
1
/
2
" ×
11"L
Important
If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
Note
Default:
•Tray 1
• Metric version: A4L
• Inch version: 8
1
/
2
" × 11"L
•Tray 2
• Metric version: A4L
• Inch version: 8
1
/
2
" × 11"L
Reference
p.77 “Changing the Paper Size”
Paper Type:Bypass tray
Set the display so you can see what type of paper is loaded in the bypass tray.
• The paper types you can set for the bypass tray are as follows:
• recycled paper, special paper, color paper, letterhead, preprinted paper,
prepunched paper, label paper, bond paper, thick paper, OHP, card-
stock
Note
Default: Thick Paper
Paper types you can set in the bypass tray for machines with the copier
function only are plain paper, thick paper and OHP.
To Next Page
Loading...
