Ricoh AFICIO 1515 MF - B/W Laser - All-in-One - Changing a User Code

User Tools (System Settings)
46
3
E Select [Program/Change] using {U}
or {T}, and then press the {OK}
key.
F Enter the registration number you
want to program using the num-
ber keys or the Quick Dial keys,
and then press the {OK} key.
G Enter the user (destination) name
using the number keys and the
Quick Dial keys, and then press
the {OK} key.
Reference
For details about entering text,
see p.83 “Entering Text”.
H Press [UserCode].
I Enter the user code using the
number keys, and then press the
{OK} key.
J Select the function using {U} or
{T}, and then check the one you
want to set the user code for using
{V}.
Note
 Repeat this step when you want
to apply more than one func-
tion.
K Press the {OK} key twice.
The “
Programmed” message ap-
pears, and then the “Address
Book” display returns.
L Press the {User Tools/Counter} key.
Changing a User Code
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Address Book Management]
using {U} or {T}, and then press
the {OK} key.
***
ZEN
018
.t
if***
***
ZEN
019
.t
if***
ZEN
020
.t
if
***
ZEN
021
.t
if***
***
ZEN
022
.t
if***
***
ZEN
023
.t
if***