E-mail Destination
59
3
M Enter the sender's password us-
ing the number keys, and then
press the {OK} key.
Note
You can enter up to eight digits.
N Press the {Cancel} key.
O Press the {OK} key.
The “
Programmed” message ap-
pears, and then the “Address
Book” display returns.
Note
To register the destination to a
group, see p.63 “Registering a
Destination to a Group”.
P Press the {User Tools/Counter} key.
Changing a Registered E-mail
Destination
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Address Book Management]
using {U} or {T}, and then press
the {OK} key.
E Select [Program/Change] using {U}
or {T}, and then press the {OK}
key.
F Press [Search].
Note
You can also enter the registra-
tion number of the user (desti-
nation) using the number keys
or the Quick Dial keys. After en-
tering the number, press the
{OK} key, and then proceed to
step
I
.
You can also search the regis-
tered destination by name, reg-
istered number, user code, fax
number or e-mail address. See
p.70 “Using the Search Function
to Select a Destination”.
G Select [Display Destination List] us-
ing {U} or {T}, and then press the
{OK} key.
H Select the e-mail destination user
you want to change using {U} or
{T}, and then press the {OK} key.
I Press the {OK} key.
ZEN
.t
ZEN
.t
ZEN
.t
ZEN
.t
To Next Page
Loading...
