Ricoh AFICIO 1515 MF - B/W Laser - All-in-One - Displaying the Destinations Registered in Groups

Registering Destinations to a Group
65
3
J Press [Dest.].
K Select [Program Group] using {U}
or {T}, and then press the {OK}
key.
L Select the group name from
which you want to remove the
user (destination) using {U} or
{T}, and then check it using {W}.
M Press the {OK} key.
N Press the {Cancel} key.
O Press the {OK} key.
The “
Programmed” message ap-
pears, and then the “Address
Book” display returns.
P Press the {User Tools/Counter} key.
Displaying the Destinations
Registered in Groups
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Prgrm./Change/Delete Group]
using {U} or {T}, and then press
the {OK} key.
E Select [Program/Change] using {U}
or {T}, and then press the {OK}
key.
F Press [Search].
Note
 You can also enter the registra-
tion number of the group using
the number keys or the Quick
Dial keys. After entering the
number, press the {OK} key,
and then proceed to step
G
.
Searching to select a registered
group by name
A Select [Search by Name] using
{U} or {T}, and then press the
{OK} key.
B Enter the characters of the des-
tination you want to display
using the number keys and the
Quick Dial keys, and then
press the {OK} key.
ZEN
038
.t
if
ZEN
048
.t
if
ZEN
082
.t
if
***
ZEN
066
.t
if***
***
ZEN
025
.t
if***