SERVICE PROGRAM 9 March 2004
5-18
Counter-Each O Jam [0 ~ 9999 /
0
/ 1/step]
7505*
Displays the total number of the original jams on the ADF that have occurred at a
certain timing or at a certain location.
Off-Regist SN 7505 210
The original does not reach the registration sensor.
On-Regist SN 7505 211
The original is caught at the registration sensor.
Insufficient gap 7505 216
The distance between originals is not sufficient. This jam can occur when the
original is not of the standard size.
7507*
Display-P Jam History
7507 1
Displays the latest 10 paper-jam history. The list below shows the possible 12
codes:
1 10 11 12 50 60
70 120 121 122 123 125
The codes correspond to the menus of SP7-504. For example, the code 1
corresponds to SP7-504-001, and the code 10 corresponds to SP7-504-10.
7508* Display-O Jam History
7508 1
Displays the total number of the original-jams history. The possible codes are as
follows:
210 211 216
The codes correspond to the menus of SP7-505. For example, the code 210
corresponds to SP7-505-210, and the code 211 corresponds to SP7-505-211.
7801
Memory/Version/PN
Memory/Version (BICU) 7801 2
Displays the version of the BICU board
7803*
Display–PM Count
7803 1 Displays the PM counter.
7804
Reset–PM Counter
7804 1
Resets the PM counter (SP7-803-001). When the program ends normally, the
message “Completed” is displayed.
7807
Reset–SC/Jam Counters
7807 1
Resets the SC, paper, original, and total jam counters. When the program ends
normally, the message “Completed” is displayed. SP7-807-1 does not reset the
following logs: SP7-507 (Display-Paper Jam History) and SP7-508 (Display-Original
Jam History).
To Next Page
Loading...
