9 March 2004 SERVICE PROGRAM
5-43
Service
Tables
5857
* Debug Log Save Function
Make SD Debug File 5857 17
Makes a 4-MB file on the HDD to save logs. The file stores the contents of key
number 2225 of SCS (for example, the information of NV usage in SCS). A file is
made in the SD when the first log is saved in the SD even if you do not execute
this SP. This processing, however, takes a long time; the user may turn the main
switch off and on before completion (the user see no message that indicates the
completion of the logging when logs are made on the occurrence of an event). The
logging takes a shorter time if you have made a log file beforehand. If you try to
make a log file on the HDD where another log file has been already made, the
contents of key number 2225 is added to the log file in the SD card. In a case like
this, a new log file is not made. To make a new log file to supersede an old log file,
you must execute SP5-857-012 before executing this SP.
Debug Log Save: SC
5858
*
Selects the content of the debugging information saved to the destination selected
by SP5-857. SP5-858-003 stores the log of the specified SC.
5858 1* Engine SC Stores SC codes generated by copier engine errors.
5858 2* Controller SC Stores SC codes generated by GW controller errors.
5858 3* Any SC [0~65535 /
0
/ 1/step]
5858 4* Jam Stores jam errors.
5859
* Debug Log Save Function [-9999999~9999999 / 0 / 1/step]
5859 1* Key 1
5859 2* Key 2
5859 3* Key 3
5859 4* Key 4
5859 5* Key 5
5859 6* Key 6
5859 7* Key 7
5859 8* Key 8
5859 9* Key 9
5859 10* Key 10
Allows you to set up to 10 keys for log files for
functions that use common memory on the controller
board.
5860* SMTP/POP3/IMAP4
Partial Mail Receive Timeout [1~168 /
72
/ 1/step] 5860 20*
Sets the amount of time to wait before saving a mail that breaks up during
reception. The received mail is discarded if the remaining portion of the mail is not
received during this prescribed time.
MDN Response RFC2298 Compliance [0 = No / 1 = Yes] 5860 21*
Determines whether RFC2298 compliance is switched on for MDN reply mail.
SMTP Auth. From Field Replacement [0 = No / 1 = Yes] 5860 22*
Determines whether the FROM item of the mail header is switched to the
validated account after the SMTP server is validated.
5869
RAM Disk
5869 1 Main Function Enables or disables the use of the RAM disk.
To Next Page
Loading...
