SERVICE PROGRAM 9 March 2004
5-46
SP6-XXX (Peripherals)
6006*
ADF Adjustment (
☛
3.14)
NOTE: Available menus depend on the machine model and its configuration.
StoS/Front Regist [–1.0 ~ +1.0 /
0.0
/ 0.1 mm/step] 6006 1
Adjusts the side-to-side registration for the front side of the original, for ADF mode.
Use the
#
key to select “+” or “–” before entering the value
Leading Regist [–5.0 ~ +5.0 /
0.0
/ 0.1 mm/step] 6006 2
Adjusts the leading edge registration for ADF mode. Use the
#
key to select “+” or
“–” before entering the value.
Trailing Erase [–3.0 ~ +3.0 /
–1.0
/ 0.1 mm/step] 6006 3
Adjusts the trailing edge erase margin for ADF mode. Use the
#
key to select “+”
or “–” before entering the value.
Sub-scan Magnif [–0.9 ~ +0.9 /
0.0
/ 0.1 %/step] 6006 5
Adjust the sub-scan magnification for the ADF.
6009
ADF Free Run
6009 1 Performs an ADF free run. Press "ON" to start; press "OFF" to stop.
6910*
ADF Shading Time [0 ~ 60 /
30
/ 1 s/step]
6910 1
Adjusts the interval used for the shading processing in the ADF mode. Light and
heat in the room may affect the scanner response. Reduce this setting if copy
quality indicates that the white level is drifting during ADF copy jobs.
To Next Page
Loading...
