SERVICE PROGRAM 9 March 2004
5-60
Toner Remain
[0~100/ 0 / 1/step]
8 801
This SP displays the percent of toner remaining for each color. This SP allows
the user to check the toner supply at any time.
Note:
• This precise method of measuring remaining toner supply (1% steps) is
better than other machines in the market that can only measure in
increments of 10 (10% steps).
• This SP is expanded for color MFP and color LP machines. For this
machine, the count is done for black only.
Machine Status
[0~9999999/ 0 / 1/step]
8 941
These SPs count the amount of time the machine spends in each operation
mode. These SPs are useful for customers who need to investigate machine
operation for improvement in their compliance with ISO Standards.
8 941 1
Operation Time Engine operation time. Does not include time while
controller is saving data to HDD (while engine is not
operating).
8 941 2 Standby Time Engine not operating. Includes time while controller
saves data to HDD. Does not include time spent in
Energy Save, Low Power, or Off modes.
8 941 3 Energy Save Time Includes time while the machine is performing
background printing.
8 941 4 Low Power Time Includes time in Energy Save mode with Engine on.
Includes time while machine is performing
background printing.
8 941 5 Off Mode Time Includes time while machine is performing
background printing. Does not include time machine
remains powered off with the power switches.
8 941 6 Down Time/SC Total down time due to SC errors.
8 941 7
Down Time/PrtJam Total down time due to paper jams during printing.
8 941 8 Down Time/OrgJam Total down time due to original jams during scanning.
8 941 9 Down Time/TonEnd Total down time due to toner end.
To Next Page
Loading...
