FIRMWARE UPDATE PROCEDURE 9 March 2004
5-74
When you have selected a
module, the text lines are
highlighted, and the “Verify”
key and the “Update” key are
displayed.
8. Press the “Verify” key.
9. Check that the message
“Verify Done” is displayed.
This indicates that the data is
correct.
If the data is incorrect, the
message “Verify Error” is
displayed. Do not use
incorrect data.
10. Turn the main switch off and on.
11. Select a module and press the
“Update” key. The firmware
update program starts and the
message “Loading” is
displayed.
B130S911.WMF
B130S912.WMF
B130S913.WMF
B130S914.WMF
Program UpDate Menu P.01
ROM: B1234567A
NEW: B1234567B
Exit Update Verify
Verify Done
Engine Card No.: 1/1
Verify Error
Engine Card No.: 1/1
Loading
Engine
✽✽✽_ _ _ _ _ _ _
To Next Page
Loading...
