9 March 2004 IMAGE FUSING AND PAPER EXIT
6-9
Detailed
Descriptions
6.7.3 PRESSURE ROLLER
The pressure springs [A] constantly
press the pressure roller [B] against
the hot roller [C]. As the default, the
springs are positioned at the end [D].
If necessary, pressure can be
decreased by changing the springs to
position [E].
6.7.4 PRESSURE RELEASE
When right door opens, part [A] (on each
side) pulls open catch [B] (on each side),
releasing pressure on the pressure roller,
so that it can turn freely to allow removal of
jams. When right door closes, part [C]
pushes catch [B] closed, restoring normal
pressure.
6.7.5 SEPARATION
The hot roller stripper pawls [A]
prevent paper from sticking to the hot
roller.
B130D929.WMF
B130D930.WMF
B130D906.WMF
[E]
[B]
[C]
[D]
[A]
[A]
[B]
[C]
[B]
[A]
To Next Page
Loading...
