ENERGY SAVER MODES OF MFP MACHINES 9 March 2004
6-18
Timers
The Energy Saver Timer and Auto Off Timer start at the same time (t
0
) when the
machine ends all jobs, when the user ends all manual operations, or when the
controller starts the default application program (the program specified by the user
[!→ System Settings → General Features → Function Priority]). The default
application program starts when the System Auto Reset Timer expires (
!
→
System Settings → Timer Settings → System Auto Reset Timer).
For more information, see “Timers” in section 6.9.
Recovery
Any of the following operations brings the machine back to the Operating Mode:
• The power switch is pressed.
• Originals are set on the document feeder.
•
The platen cover is opened.
• The controller receives a job over the network or the telephone line.
• An SC code is generated.
To Next Page
Loading...
