BIT SWITCHES 9 March 2004
3-18
Printer Switch 02 SP No. 1-103-003
No FUNCTION COMMENTS
0 1st paper feed station usage for
fax printing
0: Enabled
1: Disabled
1
2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
0:
The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be used
for printing fax messages and reports.
Note: Do not disable usage for a paper feed station
which has been specified by User Parameter Switch
0F (15), or which is used for the Specified Cassette
Selection feature.
2-7
Not used Do not change the settings.
Printer Switch 03 SP No. 1-103-004
No FUNCTION COMMENTS
0 Length reduction of received
data
0:
Disabled
1:
Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Printer Switch 03, bits 4
to 7)
1:
Incoming page length is reduced when printing.
(Maximum reducible length: Printer Switches 04,
bits 0 to 4)
1-3 Not used Do not change the settings
4
to
7
Page separation threshold (with reduction disabled with switch 03-0 above)
If the incoming page is up to x mm longer than the length of copy paper, the excess
portion will not be printed. If the incoming page is more than x mm longer than the
length of copy paper, the excess portion will be printed on the next page.
The value of x is determined by these four bits.
Hex value of bits 4 to 7 x (mm)
0 0
1 1
and so on until
F 15
Default setting: 6 mm
Cross reference
Length reduction On/Off: Printer Switch 03, Bit 0
To Next Page
Loading...
