BACKUP OF DIRECTORY INFORMATION 9 March 2004
3-60
3.6.4 UPLOADING DIRECTORY INFORMATION
1. Check that the SD card has enough free space. The SD card needs to have
150-KB free space to store the directory information of this machine.
2. Inform the user that:
You are going to copy the directory information to the SD card.
You delete those data from the SD card after the maintenance work.
3. Start the SP mode.
4. Select SP5-846-003 (Maximum Entries).
5. Check that the maximum entries are not increased (☛ 3.6.3). If the maximum
number of entries is increased, return it to the default.
6. Quit the SP mode.
7. Press the power key on the operation panel.
8. Wait until the power LED turns off.
9. Turn off the main power switch.
10. Insert the SD card in the service slot.
11. Turn on the main power switch.
12. Start the SP mode.
13. Select SP5-846-051 (Upload Directory Information).
14. Follow the instructions on the operation panel.
15. Quit the SP mode.
16. Press the power key on the operation panel.
17. Wait until the power LED turns off.
18. Turn off the main power switch.
19. Remove the SD card.
To Next Page
Loading...
