9 March 2004 DOCUMENT FEEDER
1-21
Installation
1.5.2 INSTALLATION PROCEDURE
!CAUTION
Unplug the main machine's power cord before starting the following
procedure.
1. Unpack the ADF and remove the packing tape from the bottom of the ADF
body.
2. Lift the platen cover [A], unlatch the
two latches [B] (press down on the
tabs [C]), and detach the cover
from the hook [D].
3. Push the left piece [E] to the left
and pull it up and off.
B046I505.WMF
B046I525.WMF
[A]
[B]
[C]
[D]
[E]