Ricoh Aficio 1515 - Two-Sided Combine Copying

DOCUMENT FEEDER 9 March 2004
1-22
4. Place the ADF original table [A]
on the platen cover.
5. Insert the three latches into the
openings.
NOTE: The latches may break if
you try to push the table
in at an angle.
6. Make sure that that the contact
area [B] around each latch is
flush against the cover.
7. Remove the memory card cover [C]
(" x 1)
8. Remove the rear cover [D] (" x 5).
B696I909.WMF
B696I902.WMF
[A]
[B]
[D]
[C]