Ricoh Aficio 1515 - Troubleshooting Common Issues; Resolving Machine Operation and Error Messages

DOCUMENT FEEDER 9 March 2004
1-24
14. Remove the ADF connection board guard [A] (if installed) (" x 2).
15. Insert the top of the ADF connection board [B] into the bracket [C].
16. Fasten the screw [D].
NOTE: Fasten this screw before fastening the other screw [E].
17. Fasten the screw [E].
18. Connect the cables on the ADF connection board:
• CN303
• CN306
•
CN305
• CN307
19. Fix the cables with the clamp [F].
20. Connect the cables [G] between the ADF connection board and the BICU:
• ADF connection board CN302 ↔ BICU CN109
•
ADF connection board CN301
↔
BICU CN110
21. Fasten the cables with the clamp [H].
22. Reassemble the whole copier.
23. Plug in the power cord, and turn on the main switch.
24. Make a full-size copy from the paper tray using the ADF, and check the leading
edge registration. Adjust the registration as necessary.
B696I905.WMF
[A]
[B]
[G]
[H]
[C]
[D]
[E]
[F]