Ricoh Aficio 1515 - Postscript 3

9 March 2004 POSTSCRIPT 3
1-31
Installation
1.7 POSTSCRIPT 3
1. Remove the memory card cover [A]
(" x 1).
2. Remove the rear cover [B] (" x 5).
3. Remove the upper left cover [C] if
the fax control unit is installed.
4. Remove the controller box cover [D]
(
"
x 12).
5. Remove the fax control unit (if
installed) [E] (# x 1, " x 3).
6. Install the PostScript 3 emulation board [F].
7. Reassemble the copier.
8. Plug in the power cord, and turn on the main switch.
9. Check the operations.
B696I902.WMF
B683I904.WMF
B683I905.WMF
[B]
[C]
[F]
[D]
[E]
[A]