EXTERIOR COVER AND OPERATION PANEL 9 March 2004
3-4
3.3.3 COPY TRAY
!
CAUTION
Make sure that the cables under the copy tray are in place before
reassembling the copier. If these cables are caught between the copy tray
and the inner cover, they may be severely damaged.
1. Open the front door [A].
2. Copy tray [B] (
!
x 1)
Reassembling
There are several cables under the front end of the copy tray. To set these cables
in place, gently pull these cables to the left-hand side (toward the PSU) and hold
them there as you attach the copy tray.
3.3.4 SCALE PLATE
The scale plate is for the following
models only:
• The copier/printer/scanner model
(B169)
• The basic model (B129) in Europe
1. Scale plate [A] (
!
× 2)
B130R902.WMF
B130R944.WMF
[A]
[B]
[A]
To Next Page
Loading...
