SCANNER UNIT 9 March 2004
3-10
3.4.4 SCANNER MOTOR
1. Rear cover (☛ 3.3.2)
2. Rear scale, upper right cover (☛
3.3.5)
3. Scanner motor [A] (! × 3, 1 spring, 3
screw holders,
"
× 1)
NOTE:
When reinstalling, fasten the
screws loosely, set the spring in
place, and tighten up the screws.
3.4.5 SCANNER HP SENSOR
1. Rear cover (☛ 3.3.2)
2. Left cover (☛ 3.3.5)
3. Scale plate (☛ 3.3.4) or DF rear-
lower cover [A] (! x 2)
4. Scanner HP sensor [B] (
"
× 1)
NOTE:
Move the first scanner from
the home position if you have
difficulty removing the sensor.
B130R907.WMF
B130R908.WMF
[A]
[A]
[B]