Placing Originals
17
2
A
AA
A
Place the originals, and then se-
lect any scan settings you require.
Note
❒ When placing different size
originals into the ADF, adjust
the document guide to the larg-
est original.
❒ Small-size originals may be sent
at a slight slant since they do not
match the document guide.
B
BB
B
Press [Scan Area].
C
CC
C
Select the scan area.
Specifying standard sizes
A Press [Regular].
B Press the size of the originals
to be sent, and then press [OK].
Note
❒ 8
1
/
2
"×11" indicates LT. 8
1
/
2
"×
14" indicates LG. 11"×17" in-
dicates DLT.
C Press [OK].
The selected size is shown
above the highlighted [Scan Ar-
ea].
Specifying programmed sizes
A Press [Area 1] or [Area 2].
RussianC3Fax-combine-AE_F_FM.book Page 17 Monday, July 14, 2003 2:30 PM
To Next Page
Loading...
