Ricoh Aficio 2022 - Page 352

Faxing
28
2
B
BB
B
Place the original.
Note
❒ You can scan a few pages of
your original from the exposure
glass and the remaining pages
from the ADF. When you have
finished scanning from the ex-
posure glass, remove the origi-
nal from the exposure glass and
place the remaining pages in the
ADF within ten seconds.
❒ To send two or more pages us-
ing the exposure glass, set them
one page at a time.
❒ The original can be placed
whenever, before the {
{{
{Start}
}}
} key
is pressed.
Reference
p.13 “Placing Originals”
C
CC
C
Select the scan settings you re-
quire.
Reference
p.30 “Scan Settings”
D
DD
D
Dial a destination.
Note
❒ If you make a mistake, press the
{
{{
{Clear/Stop}
}}
} key, and then enter
the correct number.
Reference
p.35 “Specifying a Destination”
p.47 “Chain Dial”, Facsimile Ref-
erence <Advanced Features>
p.47 “Redial”, Facsimile Refer-
ence <Advanced Features>
E
EE
E
Press the {
{{
{Start}
}}
} key.
Note
❒
Do not lift the ADF during scanning.
After transmission, the standby
display appears.
-
--
-Sending originals using the
exposure glass
A Make sure that Immed. TX is se-
lected. If it is not, press [Immed. TX].
B
Place the first page face down on
the exposure glass.
C Dial a destination.
D
Make the scan settings you require.
E Press the {
{{
{Start}
}}
} key.
F Place the next original on the expo-
sure glass within 10 seconds after
the machine has finished scanning
the first original.
G Repeat steps D to F for all originals.
H Place the last original, and then
press [#
##
#].
RussianC3Fax-combine-AE_F_FM.book Page 28 Monday, July 14, 2003 2:30 PM