Sub Transmission Mode
63
4
p.79 “Transmission with Image
Rotation”
❒ This function is only available with
Memory Transmission.
❒ This function is only available with
the ADF.
❒ You can confirm whether both
sides were properly scanned using
the Stamp function. See p.72
“Stamp”.
❒ You can program one of the Quick
Operation keys with operations for
this function. Using the key allows
you to omit steps B and C.
A
AA
A
Place the original in the ADF, and
then select the scan settings you
require.
Reference
p.13 “Placing Originals”, Fac-
simile Reference <Basic Features>
p.30 “Scan Settings”, Facsimile
Reference <Basic Features>
B
BB
B
Press [Sub TX Mode].
C
CC
C
Press [2 Sided Original].
D
DD
D
Specify the original position.
Check the orientation of the placed
document, and then press or
.
Note
❒ Make sure that the specified
original position matches the
orientation of originals loaded
in the ADF.
E
EE
E
Specify the page opening orienta-
tion from [Top to Top] or [Top to Bot-
tom].
Original
Original position
Page opening orinentation
Output at the other end
Top to Bottom
Top to Bottom
Top to Top
Top to Top
A4, 8
1
/2" x 11"
GHPY030E
RussianC3Fax-combine-AE_F_FM.book Page 63 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
