Using Key Operator Settings
153
9
E
EE
E
Select [Program Size 1] or [Program
Size 2
].
F
FF
F
Enter a horizontal size using the
number keys.
Note
❒ Each time you press [mm] or
[
inch
], the units switch between
“mm” and “inch”. If you enter a
length and change the units by
pressing [
mm
] or [
inch
], the
length is converted automati-
cally according to the unit (frac-
tions are rounded off). For
example, when you enter {
{{
{2}
}}
},
{
{{
{2}
}}
}, and {
{{
{0}
}}
} in millimeters and
change to “inch”, the length “8.7
inch” is shown on the display. If
you press [
mm
] or [
inch
] again,
“221 mm” is displayed.
❒ If you make a mistake, press
[Clear] or the {
{{
{Clear/Stop}
}}
} key,
and then try again.
❒ To cancel a scan size, press [Can-
cel].
G
GG
G
Select a vertical size, and then
press [
OK
].
Note
❒ A displayed vertical size differs
depending on the selected unit.
When [mm] is selected, [Auto De-
tect], [210mm (A4)], [257mm(B4
JIS)], [297mm (A3)], [216mm (8
1/2)], and [279mm (11)] are
shown. When [inch] is selected,
[Auto Detect], [8.3inch (A4)],
[10.1inch(B4 JIS)], [11.7inch (A3)],
[8.5inch], and [11.0inch] are
shown.
❒ To cancel a scan size, press [
Can-
cel
].
H
HH
H
Press [
Exit
].
I
II
I
Press the {
{{
{User Tools/Counter}
}}
} key.
The standby display appears.
Deleting a scan size
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
RussianC3Fax-combine-AE_F_FM.book Page 153 Monday, July 14, 2003 2:36 PM
To Next Page
Loading...
