Installing the Software
37
2
J
JJ
J
Follow the instructions on the
screen.
Note
❒ When installation is complete,
the printer with its port directed
to “1394_00n” appears in the
[Printers] folder. (“n” is the
number of printers connected.)
Windows XP
A
AA
A
Connect the machine and the
computer using the IEEE 1394 in-
terface cable.
The [Found New Hardware Wizard] di-
alog box appears.
B
BB
B
Confirm that “This wizard helps
you install software for: (printer
name)” is displayed, and click [In-
stall from a list or specific location (Ad-
vanced)], and then click [Next].
“Please choose your search and in-
stallation option.” appears.
C
CC
C
Select the [Search for the best driver
in these locations.] check box, and
[Include this location in the search:]
check box.
D
DD
D
Install the printer driver follow-
ing the same procedure as in steps
E
EE
E
to
J
JJ
J
for Windows 2000.
Note
❒ When installation is complete, a
printer with its port directed to
“1394_00n” appears in the
[Printers and Faxes] folder. (“n” is
the number of printers connect-
ed.)
-
--
-Disabling the Device
❖
❖❖
❖ If [Add New Hardware Wizard] ap-
pears every time you restart the com-
puter using an operating system that
does not support SCSI print, or plug
in/take out the cable, disable the de-
vice with the following procedure:
• Windows Me
A In the [Add New Hardware Wiz-
ard] dialog box, confirm that
[Windows has found the follow-
ing new Hardware: IEEE SBP-2
Device] is displayed, and click
[Recommended search for a bet-
ter driver [Recommended]], and
then click [Next].
B When “Windows was unable
to locate the software for this
device.” appears, click [Fin-
ish].
❖
❖❖
❖ If you do not want to install the printer
when [Found New Hardware Wizard]
starts when using an operating sys-
tem that supports SCSI print, disable
the device with the following proce-
dure:
• Windows 2000
A In the [Found New Hardware
Wizard] dialog box, click
[Next].
B When “This wizard will
complete the installation for
this Device: Unknown” ap-
pears, click [Search for a suita-
ble driver for my device
[recommended]], and then
click [Next].
C When “Locate Driver Files”
appears, remove all selec-
tions from [Optional search lo-
cations.], and then click [Next].
RussianC3-GB-Pref1-F1_FM.book Page 37 Friday, June 13, 2003 2:16 PM
To Next Page
Loading...
