Ricoh Aficio 2022 - Page 781

Initial Scanner Setup
15
2
❖
❖❖
❖ Wait Time for Next Orig.: Exposure
Glass
When dividing originals and scan-
ning them individually with the
exposure glass to form a single file,
select [OFF], [Set Wait Time], or [Con-
tinuous Wait] for the waiting status.
Note
❒ If either [SADF] or [Batch] is
specified when scanning, this
setting is invalid.
❒ If [Off] is selected, sending will
start automatically after one
page of original is scanned.
❒ If [Set Wait Time] is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start when addi-
tional originals are placed and
the {
{{
{Start}
}}
} key is pressed within
this time. You can end scanning
and begin sending by pressing
the {
{{
{#}
}}
} key within this time. If
the specified time has passed,
sending starts automatically
and you do not need to press the
{
{{
{#}
}}
} key.
❒ If [Continuous Wait] is selected,
the machine will wait for addi-
tional originals until the {
{{
{#}
}}
} key
is pressed. Scanning will start
when additional originals are
placed and the {
{{
{Start}
}}
} key is
pressed. You can end scanning
and begin sending by pressing
the {
{{
{#}
}}
} key.
❒ If originals are placed in the
ADF, sending will start without
waiting for additional originals
after all originals in the ADF
have been scanned even if you
select [Continuous Wait].
❒ If a paper jam occurs or any of
the following operation is per-
formed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the {
{{
{#}
}}
} key
is pressed.
• Changing the settings such
as the scan settings
• Opening the upper cover of
the ADF
• Pressing the {
{{
{Interrupt}
}}
} key to
activate the copy mode
❖
❖❖
❖ Wait Time for Next Original(s): SADF
When dividing originals and scan-
ning them separately with the
ADF to form a single file, select [Set
Wait Time] or [Continuous Wait] for
the waiting status.
Note
❒ If [SADF] is specified when scan-
ning, this setting is valid.
❒ If [Set Wait Time] is selected, en-
ter the waiting time in seconds
(3-999) for placing additional
originals with the number keys.
Scanning will start automatical-
ly when additional originals are
placed within this time. You can
end scanning and begin sending
by pressing the {
{{
{#}
}}
} key within
this time. If the specified time
has passed, sending starts auto-
matically and you do not need
to press the {
{{
{#}
}}
} key.
❒ If [Continuous Wait] is selected,
the machine will wait for the ad-
ditional originals until the {
{{
{#}
}}
}
key is pressed. Scanning will
start when additional originals
are placed and the {
{{
{Start}
}}
} key is
pressed. You can end scanning
and begin sending by pressing
the {
{{
{#}
}}
} key.