Appendix
110
9
[Insufficient memory. Reduce the scanning area.] • Reset the scan size.
• Lower the resolution.
• Set with no compression. See p.19
“Send Settings”.
Note
❒ “The Relationship between the Resolu-
tion and the Scanning Area” chart in
Help for halftone scanning might not al-
ways apply. Scanning cannot be per-
formed if large values are set for
brightness when using halftone or high
resolution.
❒ When a paper misfeed occurs in the ma-
chine during printing, scanning cannot
be performed. In this case, after the mis-
fed paper has been removed, proceed
with scanning.
[Invalid Winsock version. Please use version 1.1 or high-
er.]
Install the operating system of the compu-
ter or copy Winsock from the operating
system CD-ROM.
[No response from the scanner.] • Check whether the machine is connect-
ed to the network correctly.
• The network is crowded. Wait for a
while, and then try to reconnect.
[No User Code is registered. Consult your system ad-
ministrator.]
Access is restricted with user codes. Con-
sult the system administrator of the ma-
chine.
[Please call your service representative.] An unrecoverable error has occurred in the
machine. Call your service representative.
[Scanner is in use for other function. Please wait.] A function of the machine other than the
scanner function is being used such as the
copier function. Wait for a while and recon-
nect.
[Scanner is not available. Check the scanner connec-
tion status.]
• Check whether the main power switch
of the machine is turned off.
• Check whether the machine is connect-
ed to the network correctly.
• Deselect the personal firewall function
of the client computers.
[Scanner is not ready. Check the scanner and the op-
tions.]
Check whether the ADF cover is closed.
[The name is already in use. Check the registered
names.]
You tried to register a name that is already
in use. Use another name.
Message Causes and solutions
To Next Page
Loading...
