ROM HISTORY
A265/A267 7-12 SM
7.3 ROM HISTORY
A895 Fax Unit Firmware Modification History
Description Of Modification
Firmware
Level
Serial Number
Software
Version
This is first production version.
When the received CSI have only space data, it
is ignored by this version firmware.
Line Error Marks on received page:
A mark will be printed on the left edge of the
page anywhere a line error has occurred in the
data if following bit is enabled.
System switch00 bit4
0:
Disabled
1:
Enabled
In order to ensure that the NSF/DIS signals (from
the machine that is to receive the facsimile) will
successfully be received by the sender, the
transmission duration of these signals can now
be extended as follows:
G3 switch0F
Bit 3 Bit 2 Settings
0 0 32 sec
0 1 40 sec
1 0 50 sec
1 1 60 sec
A2685582
B
1ST MASS
PRODUCTION
10.03
Conditions for printing (Scan Router):
It determines whether or not the machine will
print out the incoming fax when transmission is
made to the Scan Router Professional Station.
User Parameter switch31 bit2
0:
Document not printed
1:
Document will be printed
A2685582
C
December 1999
Production
13.03
Rev. 02/2000
To Next Page
Loading...
