What to do If Something Goes Wrong
104
3
F Square the paper and set it in the
tray.
Important
❒
Do not stack paper over the lim-
it mark.
G While pressing the release lever,
adjust the side fences to the new
paper size.
Important
❒
When setting small quantities of
copy paper, be careful not to
squeeze in the side fence too
much or paper will not be fed
properly.
H Lock the side lever.
I While pressing the release lever,
adjust the back fence to the new
paper size.
J Adjust the tray size with the pa-
per size selector to the new paper
size.
Note
❒
If you cannot find your desired
paper size, select “
p
”, then set
the copy paper size with the “11
To Next Page
Loading...
