DRAFT 2003/11/12
User Tools (Copier Features)
90
4
❖
❖❖
❖ User Auto R/E
Specifies original and copy sizes displayed when [UserAuto] is pressed. See
p.41 “User Auto Reduce/Enlarge”.
Select the copy size to use with the original size.
Note
❒ If you select a setting for A0(E), A4(A), or B1 size paper in User Auto Re-
duce/Enlarge, you cannot select [HorizontalL
LL
L]. When you cannot select
[HorizontalL
LL
L] (grayed out), select the original size and copy size for Hori-
zontal using this setting.
❖
❖❖
❖ UserAutoR/E Orig.
Specifies whether an original should be processed as a vertical or horizontal
original when [UserAuto] is selected. See p.41 “User Auto Reduce/Enlarge”.
• VerticalK
• HorizontalL
Note
❒ Default: VerticalK
Note
❒ You cannot specify A0(E), A4(A), B1, or B4 in User Auto R/E when you se-
lect [HorizontalL
LL
L].
Edit
❖
❖❖
❖ Margin Adjustment
Specifies the default setting for the margin size.
You can set the top and bottom margin sizes. See p.43 “Margin Adjustment”.
Note
❒ Default:
• Metric version: +20 mm
• Inch version: +0.8"
❒ The size can be set as follows:
• Metric version: -200 mm to 200 mm (1 mm increments)
• Inch version: -7.8" to 7.8" (0.1" increments)
❖
❖❖
❖ Shift Image
Specifies the default setting for Shift. Use [↑
↑↑
↑] [↓
↓↓
↓] to set the shift orientation
and distance. See p.44 “Shift”.
To Next Page
Loading...
