DRAFT 2003/11/12
4
Control Panel
This illustration shows the control panel of a machine that has all options fully
installed.
1. {
{{
{User Tools}
}}
} key
Press to change the default settings and
operation conditions to match your re-
quirements. See p.77 “User Tools (Copier
Features)”. Can also be used to display
and print the total number of copies
made, For details, see “Counter”, General
Settings Guide.
2. {
{{
{New Job}
}}
} key
Press to make settings for the next copy
job and scan originals during a copy run.
See p.22 “Job Preset”.
3. Indicators
Show errors or machine status. For de-
tails, see “Control Panel”, General Settings
Guide.
L: Service Call indicator
x: Misfeed indicator
M: Open Cover indicator
E: Used Toner Full indicator
D: Add Toner indicator
C: Load Paper indicator
Set Original: Shows the machine is ready
to scan an original.
4. Screen
Displays the keys to operate each func-
tion, operation status, and error messag-
es.
5. {
{{
{Program}
}}
} key
Press to store or select the program
mode. See p.27 “Programs”.
6. {
{{
{Clear Modes}
}}
} key
Press to clear a setting's contents. The
number of copies is cleared when you
press and hold down this key for three
seconds.
7. {
{{
{Energy Saver}
}}
} key
Press to enter Energy Saver mode. When
you press this key again, the machine re-
turns to the ready condition. For details,
see “Saving Energy”, General Settings
Guide.
8. {
{{
{Interrupt}
}}
} key
Press to make interrupt copies during a
copy run. See p.24 “Interrupt Copy”.
1 2 5 6 7 8 10 11
12 13 14 15 16 17 1918 20 21
493
ABB539S
To Next Page
Loading...
