DRAFT 2003/11/12
Copying
30
2
Copier Functions
Adjusting Copy Image Density
Preparation
You can adjust the copy density to
match your originals. There are
three types of density function:
❖
❖❖
❖ Auto Image Density
To automatically adjust the im-
age density.
❖
❖❖
❖ Manual Image Density
To adjust the image density of
whole originals.
❖
❖❖
❖ Combined Auto and Manual Densi-
ty
To copy originals with a dirty
background (such as newspa-
pers). You can adjust the fore-
ground density while leaving
the background unchanged.
Reference
Related default settings:
p.85 “Auto Density”
p.85 “Adj. Scan Density”
p.87 “Orig.Mode Density”
A
AA
A
Select the method of image densi-
ty adjustment.
Auto image density
A Make sure the {
{{
{Auto Image Den-
sity}
}}
} key is pressed and the
Auto Image Density indicator
lights.
Note
❒ If the Auto Image Density
function is not selected, press
the {
{{
{Auto Image Density}
}}
} key.
Manual image density
A If Auto Image Density is se-
lected, press the {
{{
{Auto Image
Density}
}}
} key to cancel it.
B Adjust the image density using
the {
{{
{Lighter}
}}
} or {
{{
{Darker}
}}
} keys.
The image density indicator
moves.
ABB548S
To Next Page
Loading...
