2
Names of Major Options
Major options for this machine are referred to as follows:
• Roll Feeder Type 240A → Paper roll tray 1
• Roll Feeder Type 240B → Paper roll tray 2
• Paper Cassette Type 240 → Cut paper tray
• Table Type 240 → Table
•Stamp Board Type A→ Stamp board
• Hard Disk Drive Type 240 → HDD
Terms
• Long length original/paper
Original/paper length longer than 1,189 mm, 46.8".
NeptuneC1_GBzen_F_FM_pre.book Page 2 Tuesday, December 16, 2003 5:03 PM