Ricoh Aficio 240W - User Tools (System Settings); User Tools Menu (System Settings)

29
3. User Tools (System Settings)
User Tools Menu (System Settings)
❖
❖❖
❖ General Features (see p.33 “General Features”)
User Tools item menu Default
Adjust Cut Length • Metric version
0.0 mm
• Inch version
0.0 inch
Fusing Adjustment Plain Paper: 3
Translucent Paper: 2
Film: 3
Orig. Size Detect • Metric version
A Series
• Inch version
Engineering
Tray Paper Size • Metric version
Bypass Tray: Under 420mm Width
Paper Roll 1
*1
: A Series 841mm
Paper Roll 2
*1
: A Series 420mm
Cut Paper Tray
*2
: A Series A4K
• Inch version
Bypass Tray: Under 17" Width
Paper Roll 1
*1
: Engineering 34"
Paper Roll 2
*1
: Engineering 17"
Cut Paper Tray
*2
: Engineering 12
×
18K
Tray Paper Type Bypass Tray: Plain
Paper Roll 1
*1
: Plain
Paper Roll 2
*1
: Plain
Cut Paper Tray
*2
: Plain
Orig. Edge Hold Off
Output Tray Upper
Orig. Feed Delay1 1 sec.
Orig. Feed Delay2 Off
Auto Roll Switch. Off
Fine Ratio:Copier 0.0%
Panel Tone On
Warm Up Notice On
Copy Count Displ. Up
Feed Start Method Auto
NeptuneC1_GBzen_F_FM_pre.book Page 29 Tuesday, December 16, 2003 5:03 PM