Settings You Can Change with User Tools
95
4
❖ Auto Image Density Priority
Set this function to use Auto Image
Density when the power is turned
on, or modes cleared.
Note
❒ Default: Text: On, Text/Photo:
On, Photo: Off, Pale: On, Genera-
tion Copy: On
❖ Copy Quality
You can adjust the quality level of
copies for each original type (Text,
Text/Photo, Photo, Pale, Genera-
tion Copy).
•Text
Adjust text sharpness.
Note
❒ Default: Normal
❒ [Custom Setting] is the value
set during service setup.
❒ Choosing [Sharp] or Sort af-
fects the outline sharpness of
text.
•Text/Photo
When there are photo(s) and
text on the original, select which
takes priority.
Note
❒ Default: Normal
❒ [Custom Setting] is the value
set during service setup.
❒ [Normal] gives a balanced text
and photo reproduction.
•Photo
For a photo original, adjust the
finish quality level to match the
type of photo original.
Note
❒ Default: Print Photo
❒ [Custom Setting] is the value
set during service setup.
❒ Select [Print Photo] for printed
photo originals, and [Coarse
Print] for a coarse dot finish,
such as newspaper photos.
❒ Select [Glossy Photo] for print-
ed photo and text originals.
•Pale
Adjust the quality level for the
finish of a pale original with
normal density.
Note
❒ Default: Normal
❒ [Custom Setting] is the value
set during service setup.
•Generation Copy
Adjust the quality level so as
not to thicken the lines of the
finish image.
Note
❒ Default: Normal
❒ [Custom Setting] is the value
set during service setup.
❖ Image Density
You can select one of seven origi-
nal image density levels for each
original type (Text, Text/Photo,
Photo, Pale, Generation Copy).
Note
❒ Default: Text: Normal, Text/Pho-
to: Normal, Photo: Normal, Pale:
Normal, Generation Copy: Normal
RuC4_AE_Copy-F_FM_forPaper.book Page 95 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
