Copying
26
2
D Close the right cover.
E If the duplex unit is installed, close it.
F Press the {#} key.
G Select the paper size, and then select [Thick Paper] for the paper type.
H Press [OK].
I Place your originals, and then press the {Start} key.
Note
❒ When copying onto OHP transparencies, remove copies one by one.
❒ When setting OHP transparencies, thin paper or label paper (adhesive la-
bels), Staple, Shift or Sort function may not be used.
J When your copy job is finished, press the {Clear Modes} key to clear the set-
tings.
ZEWH330E
AHR014S
RuC4_AE_Copy-F_FM_forPaper.book Page 26 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
