Copying
40
2
Sort
The machine can scan originals into
memory and automatically sort cop-
ies.
Reference
Related default settings:
p.105 “Select Stack Function”
p.105 “Memory Full Auto Scan Re-
start”
p.104 “Rotate Sort: Auto Paper
Continue”
p.94 “Auto Tray Switching”
❖ Sort
Copies are assembled as sequen-
tially-ordered sets.
❖ Rotate Sort
Every other copy set is rotated by
90°KL and delivered to the copy
tray.
Note
❒ To use the Rotate Sort function,
two paper trays with paper of
the same size and type, but dif-
ferent orientation (KL), are re-
quired. See ”Paper Type:
Tray1-4”, General Settings Guide.
Reference
For the paper capacity of the op-
tional finishers:
”500-Sheet Finisher”General Set-
tings Guide, ”1000-Sheet Finish-
er”General Settings Guide.
❖ Shift Sort
• 500-Sheet Finisher/1000-Sheet
Finisher/Shift Sort Tray
Each time the copies of one set
or a job are delivered, the next
copy is shifted to separate each
set or job. If the shift sort tray is
installed, this function is done
by sliding from side to side.
A Press [Sort] or [Rotate Sort].
❖ When a finisher is not installed
❖ When the 500-sheet finisher is
installed
RuC4_AE_Copy-F_FM_forPaper.book Page 40 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
