Copier Functions
59
2
Border Erase
A Press [Edit/Stamp].
B Press [Erase].
C
Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set an erase border width us-
ing [n] and [o].
Note
❒ To change the value entered,
press [n] and [o] to set the
new value.
C Press [OK].
Selecting [Diff. Width]
A Press [Diff. Width].
B Press the key for the border
you want to change, and then
set the erase border width us-
ing [n] and [o].
C Press [OK].
D Press [OK].
E Place originals, and then press the
{Start} key.
Centre erase
A Press [Edit/Stamp].
B Press [Erase].
C Press [Centre].
D Set the erase centre width using
[n] and [o], and then press [OK].
E Press [OK].
F Place originals, and then press the
{Start} key.
RuC4_AE_Copy-F_FM_forPaper.book Page 59 Thursday, April 14, 2005 1:21 PM
To Next Page
Loading...
