Ricoh Aficio 3025 - Chapters; Slip Sheets

Copier Functions
73
2
Chapters
Page numbers you specify with this
function will appear on the front of
copy sheets.
Preparation
Before selecting this function,
press [Dup./Combine/Series] and se-
lect the Duplex (1 Sided→2 Sided)
or Combine function.
Note
❒ This function can be used only when
you use the Duplex (1 Sided
→ 2 Sid-
ed) or Combine function.
❒ You can specify up to 20 pages.
A Press [Cover/Slip Sheet].
B Press [Desig./Chapter].
C Press [Chapter].
D Press the key to select the chapter
number.
E Enter the number of the chapter's
first page using the number keys,
and then press the {#} key.
F To specify another page, repeat
steps D to E.
Note
❒ To select chapters 11 to 20, press
the [T11-20] key.
G When page designation is com-
plete, press [OK].
H Press [OK].
I Place originals, and then press the
{Start} key.
Slip Sheets
Every time the originals' page chang-
es, a slip sheet is inserted. This func-
tion can be used to automatically
insert a slip sheet between OHP
transparencies, or as a stacking func-
tion. You can also copy onto slip
sheets.
Preparation
Before selecting this function, set
the tray for slip sheets. See "Slip
Sheet Tray" in “Tray Paper Set-
tings”, General Settings Guide.
Note
❒ Load slip sheets in the same size
and orientation as copy paper or
OHP transparencies.
1
2
3
1
2
3
RuC4_AE_Copy-F_FM_forPaper.book Page 73 Thursday, April 14, 2005 1:21 PM