Ricoh Aficio 3025 - Using FTP to Connect

Registering Folders
95
5
Note
❒ If you press , you can search by
the registered name, user code,
fax number, folder name, e-mail
address, or IP-Fax destination.
❒ To delete the name, key display,
and title, see p.73 “Deleting a
Registered Name”.
F Press [Folder].
G Press the protocol which is not
currently selected.
A confirmation message appears.
H Press [Yes].
I Press [OK].
J Press [Exit].
K Press the {User Tools/Counter} key.
Using FTP to Connect
Note
❒ To register a shared folder config-
ured in Windows, see p.91 “Using
SMB to Connect”.
❒ To register a folder in an NetWare
server, see p.98 “Using NCP to
Connect”.
To register an FTP folder
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [ Administrator Tools ] , and then
press [TNext].
D Press [Address Book Management].
E Select the name whose folder you
want to register.
Press the name key, or enter the
registered number using the
number keys.
Note
❒ If you press , you can search
by the registered name, user
code, fax number, folder name,
e-mail address, or IP-Fax desti-
nation.
❒ To register the name, key dis-
play, and title, see p.73 “Delet-
ing a Registered Name”
F Press [Auth. Info], and then press
[TNext].
G Press [Specify Other Auth. Info] on
the right side of Folder Authenti-
cation.
Note
❒ When [Do not Specify] is selected,
the SMB User Name and SMB
Password that you have speci-
fied in Default User Name /
Password (Send) of File Trans-
fer settings applies. For details,
see "User Tools Menu (System
Settings)", Network Guide.
❒ If User Authentication is speci-
fied, contact your administra-
tor.
ZFFH220E