Registering Folders
101
5
Changing items under NCP
A Select "Connection Type".
B Press [Change] under Path.
C Enter the new path where the
folder is located, and then
press [OK].
Note
❒ You can also use Browse Net-
work to specify a new folder.
For details, see p.100 “Using
Browse Network to locate
the folder”.
H Press [Connection Test] to check the
path is set correctly.
I Press [Exit].
Note
❒ If the connection test fails, check
the settings, and then try again.
J Press [OK].
K Press [Exit].
L Press the{User Tools / Counter}key.
To delete the registered folder
Note
❒ To delete a name entirely, see p.73
“Deleting a Registered Name”.
A Press the{User Tools/Counter}key.
B Press [System Settings].
C
Press
[
Administrator Tools
]
, and then
press [TNext].
D Press [Address Book Management].
E Select a user of the folder you
want to delete.
Press the name key, or enter the
registered number using the
number keys.
F Press [Folder].
G Press the protocol which is not
currently selected.
A confirmation message appears.
H Press [Yes].
I Press [OK].
J Press [Exit].
K Press the {User Tools / Counter} key.
To Next Page
Loading...
