Ricoh Aficio 3025 - Changing a Registered IP-Fax Destination

Fax Destination
85
5
H Press [Change].
I Enther the IP-Fax destination and
then press [OK].
To program the SUB Code
A Press [Adv. Features], and then
select [SUB Code].
B Press [Change] under TX SUB
Code.
C Enter a SUB Code using the
number keys, and then press
[OK].
D To enter a password, press
[Change] under Password
(SID).
E Enter a password using the
number keys, and then press
[OK].
F Press [OK].
To program the SEP Code
A Press [Adv. Features], and then
select [SEP Code].
B Press [Change] under RX SEP
Code.
C Enter a SEP Code using the
number keys, and then press
[OK].
D To enter a password, press
[Change] under Password
(PWD).
E Enter a password using the
number keys, and then press
[OK].
F Press [OK].
To select the protocol
A Select [H.323] or [SIP].
J Press [OK].
Changing a Registered IP-Fax
Destination
A Press the {User Tools / Counter} key.
B Press [System Settings].
C Press [ Administrator Tools ] , and then
press [TNext].
D Press [Address Book Management].
E Select the name whose IP-Fax
destination you want to change.
Press the name key, or enter the
registered number using the
number keys
Note
❒ If you press , you can search
for a user by the registered
name, user code, fax number,
folder name, e-mail address, or
IP-Fax destination.
❒ To change the name, key dis-
play and title, see p.73 “Chang-
ing a Registered Name”.
F Press [Fax Dest.].
G Press [IP-Fax].
H Change the settings.
To change the IP-Fax Destination
A Press [Change] under IP-Fax
Destination.
B Enter the new destination us-
ing the number keys, and then
press [OK].