Loading Paper
17
1
Important
❒ To avoid damage, pinch the pa-
per guides when moving them.
H Load paper into the tray with the
print side down.
Important
❒ Confirm that the top of the stack
is not higher than the limit mark
inside the tray.
❒ Confirm that paper fits under
the rear guide.
I Lift the front side of the tray, and
then place it into the printer.
Carefully slide it into the printer
until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
J Attach the paper tray cover pro-
vided when you have pulled out
the tray extension.
Note
❒ The paper tray cover contains
four mounting holes.
• Use the two outer holes when
attaching the paper tray cov-
er as a cover for the standard
tray.
• Use the two inner holes when
attaching the paper tray cov-
er as a cover for an additional
tray.
ZKGY130E
ZKGY150E
ZKGH240E
KirP4GB_Mainte-F5_FM_forPaper.book Page 17 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
