Replacing Consumables and Maintenance Kit
36
2
E Return the paper tray to its origi-
nal position, and then remove the
friction pad from the tray.
Note
❒ The friction pad spring may
come off. Be careful not to lose
the friction pad spring.
F Insert the new friction pad in the
paper tray.
Attach the center projection of the
new friction pad to the spring, and
then align the projection of both
sides of the friction pad to the
holes of the paper tray. Then push
the friction pad as shown in the il-
lustration until it clicks.
After pushing in the friction pad,
try pushing it several times to
check it is properly installed. If it
jumps back into position due to the
force of the spring, it is properly in-
stalled.
G Push the friction pad until it locks
securely.
H If your printer is equipped with
the optional paper feed unit(s),
follow the same procedure when
replacing the friction pad.
ZKGM180E
ZKGM190E
KirP4GB_Mainte-F5_FM_forPaper.book Page 36 Wednesday, December 8, 2004 6:13 PM
To Next Page
Loading...
